Getting Used Machinery Home: Five Ways to Move It (UK)
Bought a used chipper or grinder far from home? Your own trailer, a hired trailer, a haulier, a courier or waiting: what to check with each.
In this guide
Work out how you'll get a used machine home before you agree to buy it: your own vehicle and trailer, a hired trailer, a machinery haulier, a pallet firm or courier for small kit, or waiting until you're passing. Most heavy kit sells collection only, so the move is usually yours to sort out and pay for. The right answer depends on the machine's weight and size, how far it has to go, and what you're allowed to tow.
| Option | Suits | Check first |
|---|---|---|
| Your own vehicle and trailer | Anything within your licence and your plates | Licence, train weight, operator licensing |
| A hired trailer | A one-off move when your vehicle can tow it | The trailer's weights, ramps and hire terms |
| A machinery haulier | Tracked and heavy machines, long distances | Exact weight and size, who loads, transit cover |
| A pallet firm or courier | Saws, parts and other small kit | The carrier's rules on fuel and batteries, its cover |
| Waiting, or buying nearer | No rush, or the sums don't work | A collection day agreed in writing |
Before You Agree to Buy
Ask the seller these before you pay anything, and keep the answers in your TreeBay messages:
- The real weight. Ask for a photo of the machine's own plate, not a brochure figure, and allow for whatever stays on it, such as a full tank or a winch.
- The real size. Length, width and height in the position it will travel. It has to fit on the deck, between the ramps and through both gateways.
- Does it run? A machine that drives or tows is one job. A non-runner needs a winch, forklift or lift, and whoever moves it needs to know first.
- How it loads at each end. Is there a loader or forklift at the seller's yard, and at yours? Is there firm, level ground where a trailer or low-loader can get in, turn round and drop its ramps?
Then add the move to the price. A cheaper machine a long way off may not be cheaper by the time it's in your yard, so compare what each one costs delivered to you, including your own fuel and the day off work.
Too far to go and look? The rule is still to see it, and see it working, before you pay, and never to send a deposit for something you haven't seen. If you can't get there, ask a dealer or mechanic near the machine, one you've found yourself and not one the seller suggests, to inspect it for a fee.
1. Your Own Vehicle and Trailer
If your vehicle, licence and trailer can take it legally, you need nobody else. There are three checks, and our towing guide has the full rules:
- Your licence. In Great Britain, a car licence lets you tow a trailer up to 3,500kg maximum authorised mass, and the vehicle and trailer together must not exceed 7,000kg (GOV.UK: driving licence categories). Northern Ireland is stricter (nidirect).
- Your plates. The gross train weight on your vehicle's VIN plate must never be exceeded. If the plate shows no train weight, the vehicle shouldn't tow at all (GOV.UK: towing with a car).
- Operator licensing. Bringing kit home for your business counts as using the vehicle for your trade. If the trailer weighs more than 1,020kg unladen, its plated weight is added to your van or tipper's, and over 3.5t in total you need a licence, unless an exemption applies. The towing guide sets out the exemptions, which are narrow.
A tow-behind chipper is a trailer itself. If it's coming home on its own wheels, check it before it leaves the seller's yard: working brakes if it's over 750kg loaded, a breakaway cable or secondary coupling, working lights, tyres with at least 1.6mm of tread and tight wheel nuts (GOV.UK: towing with a car; trailer safety checks). A machine that has stood for months can fail on any of these. Take a number plate with your registration on it, because the trailer must show the same number as the towing vehicle (GOV.UK).
Load it properly. GOV.UK's checks are that "the trailer is not overloaded", "the load is distributed evenly" and "the load is secure" (trailer safety checks). Its load-security guidance adds: "Even small, light items can kill someone if they fall from a vehicle travelling at speed" (GOV.UK: responsibility for load security). In practice:
- Load on firm, level ground with the trailer coupled up, and keep everyone clear of the ramps and the machine.
- Use the lashing points the manual shows, with straps or chains rated for the weight. Don't lash over a chute, hood or guard.
- Fold and pin whatever moves, such as a chute, boom or stabiliser leg, and know your overall height before you meet a low bridge.
- Stop after a few miles and check the straps again.
Insurance. Ask your insurer before the day whether your policy covers the trailer and the machine on it.
2. A Hired Trailer
This suits a one-off move when your vehicle can tow the machine but you don't have the trailer. The licence, plate and operator rules above apply just the same.
- Ask for both weights. Maximum weight minus unladen weight is what the trailer can carry, and the machine has to come in under that.
- The unladen figure counts twice. It also decides which side of the 1,020kg operator licensing line you're on.
- Deck and ramps. Check the ramps are rated for the machine, that there are enough tie-down points, and that the firm allows tracked plant if that's what you're moving.
- Hire terms. Get the hire terms, deposit and insurance in writing before you pay, including who is allowed to tow it and when it's due back.
3. A Machinery Haulier
This is the route for tracked and heavy machines, long distances, or anything past your licence. You'll see it called plant haulage, machinery transport or low-loader hire. Ask local plant-hire firms and agricultural dealers, look in machinery-moving groups on Facebook, or ask on the TreeBay forum, and get more than one quote.
Give every haulier the same details: the plate weight, the size in its travel position, whether it runs, both addresses, any access problems (narrow lanes, low branches, soft ground), who loads and unloads at each end, and your dates. Then ask about:
- The price. Get it fixed and in writing, and ask whether it includes VAT, waiting time and a wasted trip if the seller isn't there. Ask whether it could go on a return run or a shared load, which may cost less but ties you to their dates.
- Transit cover. Check what their goods-in-transit cover pays and up to what limit. If that's less than the machine is worth, buy extra.
- Their operator's licence. Carrying other people's goods for payment in a combination over 3.5t needs a standard licence, whatever the trailer weighs (towing guide). You can search for an operator by name, address or licence number on GOV.UK (Find lorry or bus operators).
- The handover. Photograph the machine from every side before it's loaded, ask the driver to sign for its condition, and photograph it again when it comes off.
Who carries the risk on the road? If you book the carrier yourself, damage in transit may well be your problem, so sort out the cover first. Buying from a business for yourself, not for work, the goods stay at the trader's risk until they reach you. The exception is a carrier you commissioned that the trader didn't name as an option: then they're at your risk once they're handed over (Consumer Rights Act 2015, s.29). Buying for work, or from a private seller, the risk normally passes to you when the machine becomes yours, and for a particular used machine that's normally when you agree the deal, even if you haven't paid or it hasn't moved (Sale of Goods Act 1979, s.18 and s.20). So agree in writing who carries the risk until it's in your yard.
If the Seller or Dealer Offers Delivery
Agree the price, the day, who is carrying it and what happens if it arrives damaged, all in writing. Look it over when it comes off, before the driver leaves. If something turns out to be wrong later, our guide to your rights when you buy used kit covers what you can do.
4. A Pallet Firm or Courier for Small Kit
This suits saws, blowers, winches, parts and anything else that fits in a box or on a pallet.
- Who books it. Agree who books it and who pays. The risk point above applies here too.
- Fuel and batteries. Drain the fuel, and read the carrier's terms first: carriers set their own rules on fuel, oil and lithium batteries.
- Cover. Check what its standard cover pays, and buy extra if that's less than you paid for the kit.
- Paying. You'll probably be asked to pay before it's sent, which breaks the see-it-first rule, so keep this route for kit you've already seen or that someone you trust has looked at. Before you rely on a photo, ask for one in TreeBay messages, beside a note with today's date and your TreeBay name. It shows they have it today, not that it's theirs.
5. Wait, or Buy Nearer
Collection only doesn't always mean this week. If you've got a job or a trip that way coming up, ask the seller whether a later day would work, and agree the day in writing. They're free to say no, or to sell to someone who can come sooner, and that's the risk of waiting. Don't pay a deposit to hold something you haven't seen.
Or shorten the trip. You can search listings by your postcode and distance to see what's nearer home.
On the Day
- Check the serial or ID plate matches the paperwork, and ask for the original invoice and service history.
- See it start and run once more before it's loaded.
- Agree the price with the person who hands it over, and check your money is going to them or their business.
- Get a dated receipt with the seller's name and address and the machine's serial number, and take the keys and manual with you.
Warning Signs
Stop and read our staying safe advice if:
- They won't let you see it, or say it's already with a courier.
- They insist on their own delivery firm and want the money up front.
- A delivery firm asks you for more money to release the machine.
TreeBay doesn't hold or process payments between buyers and sellers, so there's no TreeBay delivery service, and nobody can pay for one through us.
Where to Next
- Before you hitch up: towing a wood chipper, stump grinder or plant trailer.
- Before you buy: the used wood chipper guide, the stump grinder guide and the mini tracked loader guide.
- On the other side of the deal: selling used equipment safely.
Rules change. Check the GOV.UK pages linked here before you rely on this guide.
More guides
- Buying Used Kit or a Van: Your Rights in the UK
- How to Sell Used Arborist Equipment Safely in the UK
- The Complete Guide to Buying a Used Wood Chipper in the UK